Bend-Tech EZ: $69(+$10 shipping & download) Buy Now

Bend-Tech EZ is an entry level tube bending software for the home hobbyist. If your parts are simple 2D Round Tube parts only, (parts that lay flat when completed) then EZ will most likely do the trick.

EZ provides dozens of predefined templates and has a custom part interface which allows for up to 6 bends. Additional templates are available from download.

There are dozens of pre-defined templates to choose from. Most templates allow for center, outside and inside dimensions. While scrolling down the list of templates, they graphically show up in the window on the right.

The templates are read in from a secondary file. This allows us to periodically create new templates and have them available for download.

Click here to see System Requirements for Bend-Tech.

Bend-Tech software requires an active internet connection in order to activate the license on your computer, and then every 6 month. EZ software can run offline in between.
Don't have internet connection? Click here to see the Dongle Key option.

Key EZ Features

Designer: Sketch 2D

• Click-and-sketch part creation.
• Adjustable grid-snapping.
• Sketch then adjust dimensions.
• Simple, easy-to-use 2D design.

Designer: Templates

Choose from dozens of predefined templates. The templates are easy to use and in seconds you will have your design completed and be ready to start bending.

Designer: Custom Part 2D

Create a part by starting at one end and then entering in the distance between bends and the angle at each bend. The length values can be apex or tangent values. Custom Part 2D allows bends to reverse direction (180 degree rotation).

Material Library

The Material Library includes round tubing size, wall thickness, color, and weight.

Die Library

Define your dies within the software. Definition includes CLR, Calibrated CLR (stretch factor), and Bend Location Offset.

Basic Calculation Output

Basic output includes the cut length, bend locations, bend angles, and rotation of 0.0 or 180.0 degrees. Each bend location is based from the end of the tube.

Post Bending Cutoff

Cutoff allows extra material to be added at the end of the tube for cutting after bending. The cut length and bend locations are automatically adjusted for cutoff values.

Back to

Security Dongle

If a valid internet connection is not available on your computer, you may choose to purchase a security dongle to use the software offline. This will allow your computer to run Bend-Tech software as long as the security dongle is plugged into an available USB port on the computer. This USB security dongle becomes the license for your software.

While the security dongle will allow your computer to run Bend-Tech software without an internet connection, there are a few drawbacks to using the offline method. Bend-Tech software will not be able to automatically download any new updates and the direct Help Session will not be available. Also, any maintenance of a security dongle requires shipment back to our facility and back to you at additional cost. If you are unable to provide shipment of your security dongle (such as loss or theft), you will be required to purchase the dongle along with the full price of your software.

Purchase Dongle


System requirements for Bend-Tech:

Minimum Requirements
Windows Operating System (XP, Vista, 7, 8, 8.1, 10)
1 GHz Processor
2 GB RAM (Memory)
1 GB Hard Drive Space
1024 x 768 Screen Resolution
OpenGL 1.3 Compatible Graphics Card
.NET Framework 3.5 Installed
Active Internet Connection (Internet connection is needed during the first activation and then every 6 month, software can run offline in between.)

Recommended Requirements
Windows Operating System (7, 8, 8.1, 10)
1GHz Dual-Core Processor
4GB Ram (Memory)
1 GB Hard Drive Space
1280 x 800 Screen Resolution or greater
OpenGL 1.3 Compatible Graphics Card
.NET Framework 3.5 SP1 Installed
PDF Reader Installed (for Help Guides)
Full Keyboard and Mouse
CD Drive (for install from CD)
High-Speed Internet

MacOS Requirements
Windows OS running on Emulator/Parallels. (i.e: Boot Camp, Parallels, and VMware.)
Same requirements as above.
Bend-Tech does NOT run directly on MacOS.