Create a Bent Part

From Bend-Tech 7x Wiki
Jump to: navigation, search

This thread will show how to create a "Bend Part" (a part with bends) in the assembly interface.

Please review the following thread Here.


Step 1: Select the command button "Bent Part"

Bent1.jpg


Step 2: Enter the number of bends and "OK" to continue.

Bent2.jpg


Step 3: Select the first "PickPoint" of the part. This is one end of the part. The part creation is now tied to the cursor.

Step 4: Select the "PickPoint" for the apex of 1st bend.

Step 5: Select the "PickPoint"s for any additional bends in the part. Pick these in order.

Step 6: Select the "PickPoint" for the end of the part.

Bent3.jpg


Step 7: Enter in a "Part Name". Select "OK" to continue

Bent4.jpg


Notice how Bend-Tech will update the part with the material and tooling that is selected. The PickPoints for the part features are automatically generated.

Bent5.jpg