Mach 3 and ESS Install

"Mach 3 and the Ethernet Smooth Stepper (ESS) are necessary installs for users who operate our Bend-Tech Dragon software along with our Dragon Machine."

"Carefully look through the steps below to complete these important installations. Failure to do so, may result in serious injury or death."

Step 1

• Close all running programs and click the NEXT button.

Step 2

• Select the option to "agree to the terms of this license agreement" and click the NEXT button.

Step 3

• Leave the file location folder as it is and click the NEXT button.

Step 4

• Uncheck the Parallel Port Driver, Wizards, and LazyCam checkboxes and click the NEXT button.

Step 5

• Since we are sending users a specified Dragon profile, simply click the NEXT button.

Step 6

• Click the NEXT button.

Step 7

• Wait for the program to install completely.

Step 8

• Click the FINISH button.

Step 9

• The Select Network Adapter window will appear.

• Select your ethernet adapter from the list (There is a very high probability that this is going to be the Realtek PCIe GBE Family Adapter).

• If you are unsure about your particular adapter, contact us at our office 651-257-8715 and we will help you determine this.

Step 10

• The Dragon ESS Install window will appear. Press any key on your keyboard to continue.