Custom Part uses the Center Line!

From Bend-Tech 7x Wiki
Revision as of 08:29, 5 June 2014 by Fabcam1 (talk | contribs) (Created page with "This is in comparison to the inside or outside of the material. If you know the outside or inside dimensions you will need to add or subtract 1/2 the material diameter for man...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is in comparison to the inside or outside of the material. If you know the outside or inside dimensions you will need to add or subtract 1/2 the material diameter for many cases and will need to do some quick trig or math for bends that don't line up to plane.

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Custom_Part_uses_the_Center_Line!&oldid=712"