MSP Template

From Bend-Tech 7x Wiki
Revision as of 11:59, 25 November 2014 by Fabcam1 (talk | contribs)
Jump to: navigation, search

UNDER CONSTRUCTION: THANK YOU FOR YOUR PATIENCE

Bend-Tech 7x Wiki :: MSP Template

Due to its length, the MSP Template Guide has a Table of Contents to accommodate the user.


Things to Know

The MSP Template options allow for a variety of Sheet Metal created parts to be designed at the user's specific dimensions. Parts created in the MSP Template designer can be brought into Sheet Metal and other select interfaces. Parts can also be cut and the wrappers for these cuts can be printed out after being sent to Sheet Metal.

To open a new MSP Template design:

  • Select the "MSP Template" MSP1templateicon.png option from the Task Menu that appears when the software starts up, when all designs are closed, or through the view menu.
  • When opening a new template window, it is easier if the user selects the "Maximize" Min Max Close Tab.png button right away. This way, the part chosen by the user will appear in the center of the display area and will not be obstructed by the template's illustration in the upper left hand corner of the screen.


Template Categories

Style of Plate

Msp style of plate.png

  • The "Style of Plate" section shows all of the categories of MSP Templates available.
  • Selecting a style from the list will open a new page showing variations of template options for the user to open and adjust to their desired dimensions.

ETC Msp etc.png

  • The "'ETC" button will open a new page showing templates that don't easily fall into a discernible category.

List All Msp list all.png

  • The "List All" button will show every MSP Template available.

Star 'Favorite' Button Msp star.png

  • The Star, or 'favorite' button will show all the templates that the user has saved to their favorites.
  • Clicking the star will change it from white to gold, which indicates a user favorite. All gold starred templates are user favorites.
  • Every template has three tabs. These three tabs will not always have the same buttons and entry fields. The only distinction between the templates is the "Current Template Values" section and what the dimensions there represent.
  • (Note) Additional entry fields include "K-Factor:" and "Bending Radius:" and are found in templates with bent sections only.

Template Tabs

Material

Define Material:

  • From here, users can "Name:" the material being used for the design, specify the "Thickness:", and assign a "Part Color:" to the part displayed to the right.
  • Users can also change the length increments by selecting either the "Inches" or "Millimeters" options.
    • (For bent templates) "K-Factor:" and "Bend Radius:" value fields are available.

Part Details

  • "Notes:" is where the user can make notes about the part's dimensions or specifications.
  • "Date:" is where the user can mark when the part was created or when it is set to be manufactured.
  • "Revision:" is where the user can update the date when the part specifications were revised.
  • "Description:" is where the user can provide a description of the part's specifications.

Tasks

  • "Verify" is where the user can verify dimensions as they appear on all lengths of the part.
  • "Export dxf" is for exporting the part as a .dxf file including lines, arcs and text. This button exports all geometry involved in the part.
  • "Export Plasma dxf" is for exporting the part as a plasma .dxf file which is optimal for plasma cutting because it is a flat and automated interpretation of the part's dimensions.


Washers Category Msp washers.png

  • The first button in the "Style of Plate" section is for "washers and end caps" style projects.

End Cap

Msp temp1.png

Current Template Values:

  • The distance labeled "D1" (default 1) is the length of the diameter of the outside edge of the end cap.


Washer

Msp temp2.png

Current Template Values:

  • The distance labeled "D1" (default 1) is the length of the diameter of the outside edge of the washer.
  • The distance labeled "D2" (default .5) is the length of the diameter of the inside edge of the washer.


Square Hole Washer

Msp temp3.png

Current Template Values:

  • The distance labeled "L1" (default .5) is the length of the horizontal space within the square hole washer.
  • The distance labeled "L2" (default .5) is the length of the vertical space within the square hole washer.
  • The distance labeled "D1" (default 1) is the length of the diameter of the outside edge of the washer.

Square End Cap

Msp temp4.png

Current Template Values:

  • The distance labeled "L1" (default 2) is the horizontal length of the square end cap.
  • The distance labeled "L2" (default 1) is the vertical length of the square end cap.

Square Washer

Msp temp5.png

Current Template Values:

  • The distance labeled "L1" (default 2) is the horizontal length of the square washer's outer edge.
  • The distance labeled "L2" (default 1) is the vertical length of the square washer's outer edge.
  • The distance labeled "D1" (default .5) is the length of the diameter of the inside edge of the washer.

Square Washer Square

Msp temp6.png

Current Template Values:

  • The distance labeled "L1" (default 2) is the length of the outside horizontal edge of the washer.
  • The distance labeled "L2" (default 1) is the length of the outside vertical edge of the washer.
  • The distance labeled "L3" (default .5) is the length of the inside vertical edge of the washer.
  • The distance labeled "L4" (default .25) is the length of the inside horizontal edge of the washer.


BeadLocks Category Msp beadlocks.png

  • The second button in the "Style of Plate" section is for "BeadLocks" style projects.

BeadLock

Msp temp7.png

Current Template Values:

  • The distance labeled "L1" is the length from the center of the stud hole to the part's edge.
  • The distance labeled "D1" is the length of the diameter of the outside edge of the part.
  • The distance labeled "D2" is the length of the diameter of the inside edge of the part.
  • The distance labeled "D3" is the length of the diameter of the stud holes.
  • The value labeled "#" is the number of stud holes the user would like to create circling the part.

BeadLock Pattern 1

Msp temp8.png

Current Template Values:

  • The distance labeled "L1" is the length from the center of the outer stud hole to the part's edge.
  • The distance labeled "L2" is the length from the center of the inner stud hole to the part's edge.
  • The distance labeled "D1" is the length of the diameter of the outside edge of the part.
  • The distance labeled "D2" is the length of the diameter of the inside edge of the part.
  • The distance labeled "D3" is the length of the diameter of the outer stud holes.
  • The distance labeled "D4" is the length of the diameter of the inner stud holes.
  • The pink "#" is the number of stud holes the user would like to create circling the part on the outside.
  • The orange "#" is the number of stud holes the user would like to create circling the part on the intside.

Tabs Catagory Msp tabs.png

  • The third button in the "Style of Plate" section is for "Tabs and D-Rings" style projects.

Universal Tab

Msp temp9.png

Current Template Values:

  • The distance labeled "L1" (default 2) is the length from the center of the hole to the part's bottom edge.
  • The distance labeled "R1" (default 1) is the length from the center of the hole to the part's arc.
  • The distance labeled "D1" (default .5) is the length of the diameter of the part's hole.

Flat Bottom Tab

Msp temp10.png

Current Template Values:

  • The distance labeled "L1" (default 3) is the entire width along the part's bottom edge.
  • The distance labeled "L2" (default 2) is the length from the center of the hole to the part's bottom edge.
  • The distance labeled "R1" (default 1) is the length from the center of the hole to the part's top arc.
  • The distance labeled "R2" (default .1) is the size of the part's bottom arcs.
  • The distance labeled "D1" (default .5) is the length of the diameter of the part's hole.

Link Tab

Msp temp11.png

Current Template Values:

  • The value labeled "A1" (default 90) is the angle at which the bottom two legs of the part meet.
  • The distance labeled "L1" (default 2) is the entire width along the part's bottom edge.
  • The distance labeled "L2" (default 1) is the length from the center of the hole to the A1 angle's edge.
  • The distance labeled "R1" (default 1) is the length from the center of the hole to the part's top arc.
  • The distance labeled "R2" (default .25) is the size of the part's bottom arcs.
  • The distance labeled "D1" (default .5) is the length of the diameter of the part's hole.

Link Tab (radius)

Msp temp12.png

Current Template Values:

  • The distance labeled "L1" (default 3) is the entire width along the part's bottom edge.
  • The distance labeled "L2" (default 2) is the length from the center of the hole to the part's bottom edge.
  • The distance labeled "R1" (default 1) is the length from the center of the hole to the part's top arc.
  • The distance labeled "R2" (default .25) is the size of the part's bottom arcs.
  • The distance labeled "R3" (default 2.5) is the size of the part's inner bottom arc.
  • The distance labeled "D1" (default .5) is the length of the diameter of the part's hole.

Shock Tab

Msp temp13.png

Current Template Values:

  • The value labeled "A1" (default 15) is the angle at which the bottom two legs of the part rise from the base.
  • The distance labeled "L1" (default 3) is the entire width along the part's bottom edge.
  • The distance labeled "L2" (default 2) is the length from the center of the hole to the R2 arc's edge.
  • The distance labeled "L3" (default .25) is the length from the edge of the part to the edge of the R2 arc.
  • The distance labeled "R1" (default 1) is the length from the center of the hole to the part's top arc.
  • The distance labeled "R2" (default 1.5) is the size of the part's inner bottom arc.
  • The distance labeled "D1" (default .5) is the length of the diameter of the part's hole.

Curved Tab 1

Msp temp14.png

Current Template Values:

  • The distance labeled "L1" (default 2) is the horizontal offset length from the center of the hole to the top of the part's R2 arc.
  • The distance labeled "L2" (default 2) is the vertical length from the center of the hole to the R2 arc's edge.
  • The distance labeled "L3" (default 2) is the vertical length from the bottom edge of the part to the edge of the R2 arc.
  • The distance labeled "R1" (default 1) is the length from the center of the hole to the part's top arc.
  • The distance labeled "R2" (default 1) is the size of the part's inner bottom arc.
  • The distance labeled "R3" (default 1) is the size of the part's bottom arcs.
  • The distance labeled "R4" (default 1) is the size of the part's left arc.
  • The distance labeled "R5" (default 1) is the size of the part's right arc.
  • The distance labeled "D1" (default .5) is the length of the diameter of the part's hole.

Curved Tab 2

Msp temp15.png

Current Template Values:

  • The distance labeled "L1" (default 2) is the horizontal offset length from the center of the hole to the top of the part's R2 arc.
  • The distance labeled "L2" (default 2) is the vertical length from the center of the hole to the R2 arc's edge.
  • The distance labeled "L3" (default 2) is the vertical length from the bottom edge of the part to the edge of the R2 arc.
  • The distance labeled "R1" (default 1) is the length from the center of the hole to the part's top arc.
  • The distance labeled "R2" (default 1) is the size of the part's inner bottom arc.
  • The distance labeled "R3" (default 1) is the size of the part's bottom arcs.
  • The distance labeled "R4" (default 1) is the size of the part's left arc.

Bolt On Tab

Msp temp16.png

Current Template Values:

  • The distance labeled "L1" (default 2) is the length from the center of the top hole to the base of the part.
  • The distance labeled "L2" (default .5) is the depth of the base part.
  • The distance labeled "L3" (default .25) is the vertical length from the bottom edge of the part to the center of the D2 hole.
  • The distance labeled "L4" (default .25) is the horizontal length from the bottom left edge of the part to the center of the D2 hole.
  • The distance labeled "R1" (default 1) is the length from the center of the hole to the part's top arc.
  • The distance labeled "D1" (default .5) is the length of the diameter of the part's top hole.
  • The distance labeled "D2" (default .125) is the length of the diameter of the part's bottom hole.

D Ring (flat)

Msp temp17.png

Current Template Values:

  • The value labeled "A1" (default 30) is the angle at which the two side edges of the part turn inward near the top.
  • The distance labeled "L1" (default 3) is the length of the base of the part.
  • The distance labeled "L2" (default 2) is the length from the center of the hole to the base of the part.
  • The distance labeled "R1" (default 1) is the length from the center of the hole to the part's arc.
  • The distance labeled "D1" (default .5) is the length of the diameter of the part's hole.

D Ring (radius)

Msp temp18.png

Current Template Values:

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=MSP_Template&oldid=4278"