Machine Control Screen

From Bend-Tech 7x Wiki
Revision as of 12:08, 12 July 2017 by Fabcam1 (talk | contribs)
Jump to: navigation, search

Dragon A-400 Machine Control Screen

  • The Dragon A-400 has a Machine Control screen similar to the A-150's Operator Panel, but will be accessible directly from the laptop/PC screen for use with the machine. This machine control screen will be used by the operator to jog different axes, home the machine, start any projects, check the status of any project and emergency stop the machine when necessary.
Draga400 Operator Panel1.png

Status

Draga400 Status Bar1.png

  • Under the Status section, the operator panel includes separate windows for travel/action/instructional icons that will light up while the machine is undergoing a certain process. These light up in real time as the machine is in motion.

Machine Control

Draga400 Machine Control1.png

  • Under the Machine Control section, users will have the means to Start, Pause and Stop a project that has been transferred to the machine, adjust feed rates using the Feed +, Feed - and Feed 100% buttons, and turn on the Laser, Engraver and Jog Controls. Jogging controls are explained below.

Jog Controls

Draga400 Jog Controls1.png

Draga400 Jog Controls2.png

  • Click on the Jog Controls to move the machine manually along its different axis.

Draga400 Jog Controls Close1.png

  • Click the Close button in order to close the jog controls and reveal the Start and Pause buttons again.
Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Machine_Control_Screen&oldid=8756"