Difference between revisions of "Motor Sports Templates II"
| Line 35: | Line 35: | ||
==Shackle 2 Hole== | ==Shackle 2 Hole== | ||
[[File:msp_temp25.png|right]] | [[File:msp_temp25.png|right]] | ||
| + | ===Current Template Values:=== | ||
| + | *The distance labeled "'''L1'''" (default 5) is the length from the center of the top hole to the center of the bottom hole. | ||
| + | *The distance labeled "'''R1'''" (default 1) is the length from the center of the top hole to the top arc, or from the center of the bottom hole to the bottom arc. | ||
| + | *The distance labeled "'''D1'''" (default .5) is the length of the diameter either the top or bottom hole. | ||
| + | |||
| + | ==Shackle 3 Hole== | ||
| + | [[File:msp_temp26.png|right]] | ||
| + | ===Current Template Values:=== | ||
| + | *The distance labeled "'''L1'''" (default 5) is the length from the center of the top hole to the center of the bottom hole. | ||
| + | *The distance labeled "'''L2'''" (default 2.5) is the length from the center of the middle hole to the center of the bottom hole. | ||
| + | *The distance labeled "'''R1'''" (default 1) is the length from the center of the top hole to the top arc, or from the center of the bottom hole to the bottom arc. | ||
| + | *The distance labeled "'''D1'''" (default .5) is the length of the diameter either the top or bottom hole. | ||
| + | *The distance labeled "'''D2'''" (default 1) is the length of the diameter of the middle hole. | ||
| + | |||
| + | ==Shackle 2 Hole== | ||
| + | [[File:msp_temp27.png|right]] | ||
===Current Template Values:=== | ===Current Template Values:=== | ||
Revision as of 15:30, 25 November 2014
...Motor Sports Templates Continued.
For initial information on MSP Templates, see Motor Sport Templates.
Contents
Mounts Category 
- The fourth button in the "Style of Plate" section is for Shackles, Mounts, and Plates style projects.
Spare Tire Mount
Current Template Values:
- The distance labeled "L1" (default 1) is the length from the center of the middle hole to the center of the stud holes.
- The distance labeled "D1" (default 5) is the length of the diameter of the outside edge of the part.
- The distance labeled "D2" (default 3) is the length of the diameter of the center hole.
- The distance labeled "D3" (default .5) is the length of the diameter of the stud holes.
- The pink "#" is the number of stud holes the user would like to create circling the part.
Tube Tab
Current Template Values:
- The distance labeled "L1" (default 5) is the length from the center of the top hole to the center of the bottom hole.
- The distance labeled "R1" (default 1) is the length from the center of the top hole to the top arc.
- The distance labeled "R2" (default 2) is the length from the center of the bottom hole to the bottom arc.
- The distance labeled "D1" (default 5) is the length of the diameter of the top hole.
- The distance labeled "D2" (default 3) is the length of the diameter of the bottom hole.
Bolt Lock
Current Template Values:
- The distance labeled "L1" (default 3) is the length from the center of the top hole to the center of the bottom hole.
- The distance labeled "L2" (default .75) is the length of the diameter of the inner edge of the top hole.
- The distance labeled "R1" (default 1) is the length from the center of the top hole to the top arc.
- The distance labeled "R2" (default .5) is the length from the center of the bottom hole to the bottom arc.
- The distance labeled "D1" (default .25) is the length of the diameter of the bottom hole.
Shackle 2 Hole
Current Template Values:
- The distance labeled "L1" (default 5) is the length from the center of the top hole to the center of the bottom hole.
- The distance labeled "R1" (default 1) is the length from the center of the top hole to the top arc, or from the center of the bottom hole to the bottom arc.
- The distance labeled "D1" (default .5) is the length of the diameter either the top or bottom hole.
Shackle 3 Hole
Current Template Values:
- The distance labeled "L1" (default 5) is the length from the center of the top hole to the center of the bottom hole.
- The distance labeled "L2" (default 2.5) is the length from the center of the middle hole to the center of the bottom hole.
- The distance labeled "R1" (default 1) is the length from the center of the top hole to the top arc, or from the center of the bottom hole to the bottom arc.
- The distance labeled "D1" (default .5) is the length of the diameter either the top or bottom hole.
- The distance labeled "D2" (default 1) is the length of the diameter of the middle hole.
Shackle 2 Hole
