Difference between revisions of "Motor Sports Templates II"

From Bend-Tech 7x Wiki
Jump to: navigation, search
Line 8: Line 8:
 
==Spare Tire Mount==
 
==Spare Tire Mount==
 
[[File:msp_temp22.png|right]]
 
[[File:msp_temp22.png|right]]
===Current Template Values:===
+
====Current Template Values:====
 
*The distance labeled "'''L1'''" (default 1) is the length from the center of the middle hole to the center of the stud holes.  
 
*The distance labeled "'''L1'''" (default 1) is the length from the center of the middle hole to the center of the stud holes.  
 
*The distance labeled "'''D1'''" (default 5) is the length of the diameter of the outside edge of the part.
 
*The distance labeled "'''D1'''" (default 5) is the length of the diameter of the outside edge of the part.
Line 17: Line 17:
 
==Tube Tab==
 
==Tube Tab==
 
[[File:msp_temp23.png|right]]
 
[[File:msp_temp23.png|right]]
===Current Template Values:===
+
====Current Template Values:====
 
*The distance labeled "'''L1'''" (default 5) is the length from the center of the top hole to the center of the bottom hole.
 
*The distance labeled "'''L1'''" (default 5) is the length from the center of the top hole to the center of the bottom hole.
 
*The distance labeled "'''R1'''" (default 1) is the length from the center of the top hole to the top arc.
 
*The distance labeled "'''R1'''" (default 1) is the length from the center of the top hole to the top arc.
Line 26: Line 26:
 
==Bolt Lock==
 
==Bolt Lock==
 
[[File:msp_temp24.png|right]]
 
[[File:msp_temp24.png|right]]
===Current Template Values:===
+
====Current Template Values:====
 
*The distance labeled "'''L1'''" (default 3) is the length from the center of the top hole to the center of the bottom hole.  
 
*The distance labeled "'''L1'''" (default 3) is the length from the center of the top hole to the center of the bottom hole.  
 
*The distance labeled "'''L2'''" (default .75) is the length of the diameter of the inner edge of the top hole.
 
*The distance labeled "'''L2'''" (default .75) is the length of the diameter of the inner edge of the top hole.
Line 35: Line 35:
 
==Shackle 2 Hole==
 
==Shackle 2 Hole==
 
[[File:msp_temp25.png|right]]
 
[[File:msp_temp25.png|right]]
===Current Template Values:===
+
====Current Template Values:====
 
*The distance labeled "'''L1'''" (default 5) is the length from the center of the top hole to the center of the bottom hole.
 
*The distance labeled "'''L1'''" (default 5) is the length from the center of the top hole to the center of the bottom hole.
 
*The distance labeled "'''R1'''" (default 1) is the length from the center of the top hole to the top arc, or from the center of the bottom hole to the bottom arc.
 
*The distance labeled "'''R1'''" (default 1) is the length from the center of the top hole to the top arc, or from the center of the bottom hole to the bottom arc.
Line 42: Line 42:
 
==Shackle 3 Hole==
 
==Shackle 3 Hole==
 
[[File:msp_temp26.png|right]]
 
[[File:msp_temp26.png|right]]
===Current Template Values:===
+
====Current Template Values:====
 
*The distance labeled "'''L1'''" (default 5) is the length from the center of the top hole to the center of the bottom hole.  
 
*The distance labeled "'''L1'''" (default 5) is the length from the center of the top hole to the center of the bottom hole.  
 
*The distance labeled "'''L2'''" (default 2.5) is the length from the center of the middle hole to the center of the bottom hole.
 
*The distance labeled "'''L2'''" (default 2.5) is the length from the center of the middle hole to the center of the bottom hole.
Line 51: Line 51:
 
==Shackle 2 Hole - Offset==
 
==Shackle 2 Hole - Offset==
 
[[File:msp_temp27.png|right]]
 
[[File:msp_temp27.png|right]]
===Current Template Values:===
+
====Current Template Values:====
 
*The distance labeled "'''L1'''" (default 5) is the length from the center of the top hole to the center of the bottom hole.  
 
*The distance labeled "'''L1'''" (default 5) is the length from the center of the top hole to the center of the bottom hole.  
 
*The distance labeled "'''L2'''" (default 1) is the width of the part as a whole.
 
*The distance labeled "'''L2'''" (default 1) is the width of the part as a whole.
Line 60: Line 60:
 
==Shackle 3 Hole - Offset==
 
==Shackle 3 Hole - Offset==
 
[[File:msp_temp28.png|right]]
 
[[File:msp_temp28.png|right]]
===Current Template Values:===
+
====Current Template Values:====
 
*The distance labeled "'''L1'''" (default 5) is the length from the center of the top hole to the center of the bottom hole.  
 
*The distance labeled "'''L1'''" (default 5) is the length from the center of the top hole to the center of the bottom hole.  
 
*The distance labeled "'''L2'''" (default 1) is the width of the part as a whole.
 
*The distance labeled "'''L2'''" (default 1) is the width of the part as a whole.
Line 71: Line 71:
 
==Oval Mount==
 
==Oval Mount==
 
[[File:msp_temp29.png|right]]
 
[[File:msp_temp29.png|right]]
===Current Template Values:===
+
====Current Template Values:====
 +
*The distance labeled "'''L1'''" (default ) is the length from the center of the top hole to the center of the middle hole.
 +
*The distance labeled "'''R1'''" (default ) is the length from the center of the top hole to the top arc, or from the center of the bottom hole to the bottom arc.
 +
*The distance labeled "'''R2'''" (default ) is the length from the center of the middle hole to the left and right arcs.
 +
*The distance labeled "'''D1'''" (default ) is the length of the diameter of the middle hole.
 +
*The distance labeled "'''D2'''" (default ) is the length of the diameter of either the top or bottom hole.

Revision as of 16:08, 25 November 2014

...Motor Sports Templates Continued.

For initial information on MSP Templates, see Motor Sport Templates.

Mounts Category Msp mounts.png

  • The fourth button in the "Style of Plate" section is for Shackles, Mounts, and Plates style projects.

Spare Tire Mount

Msp temp22.png

Current Template Values:

  • The distance labeled "L1" (default 1) is the length from the center of the middle hole to the center of the stud holes.
  • The distance labeled "D1" (default 5) is the length of the diameter of the outside edge of the part.
  • The distance labeled "D2" (default 3) is the length of the diameter of the center hole.
  • The distance labeled "D3" (default .5) is the length of the diameter of the stud holes.
  • The pink "#" is the number of stud holes the user would like to create circling the part.

Tube Tab

Msp temp23.png

Current Template Values:

  • The distance labeled "L1" (default 5) is the length from the center of the top hole to the center of the bottom hole.
  • The distance labeled "R1" (default 1) is the length from the center of the top hole to the top arc.
  • The distance labeled "R2" (default 2) is the length from the center of the bottom hole to the bottom arc.
  • The distance labeled "D1" (default 5) is the length of the diameter of the top hole.
  • The distance labeled "D2" (default 3) is the length of the diameter of the bottom hole.

Bolt Lock

Msp temp24.png

Current Template Values:

  • The distance labeled "L1" (default 3) is the length from the center of the top hole to the center of the bottom hole.
  • The distance labeled "L2" (default .75) is the length of the diameter of the inner edge of the top hole.
  • The distance labeled "R1" (default 1) is the length from the center of the top hole to the top arc.
  • The distance labeled "R2" (default .5) is the length from the center of the bottom hole to the bottom arc.
  • The distance labeled "D1" (default .25) is the length of the diameter of the bottom hole.

Shackle 2 Hole

Msp temp25.png

Current Template Values:

  • The distance labeled "L1" (default 5) is the length from the center of the top hole to the center of the bottom hole.
  • The distance labeled "R1" (default 1) is the length from the center of the top hole to the top arc, or from the center of the bottom hole to the bottom arc.
  • The distance labeled "D1" (default .5) is the length of the diameter either the top or bottom hole.

Shackle 3 Hole

Msp temp26.png

Current Template Values:

  • The distance labeled "L1" (default 5) is the length from the center of the top hole to the center of the bottom hole.
  • The distance labeled "L2" (default 2.5) is the length from the center of the middle hole to the center of the bottom hole.
  • The distance labeled "R1" (default 1) is the length from the center of the top hole to the top arc, or from the center of the bottom hole to the bottom arc.
  • The distance labeled "D1" (default .5) is the length of the diameter either the top or bottom hole.
  • The distance labeled "D2" (default 1) is the length of the diameter of the middle hole.

Shackle 2 Hole - Offset

Msp temp27.png

Current Template Values:

  • The distance labeled "L1" (default 5) is the length from the center of the top hole to the center of the bottom hole.
  • The distance labeled "L2" (default 1) is the width of the part as a whole.
  • The distance labeled "L3" (default 2) is the length from the bottom of the part to the lowest bend.
  • L4
  • The distance labeled "D1" (default .5) is the length of the diameter of either the top or bottom hole.

Shackle 3 Hole - Offset

Msp temp28.png

Current Template Values:

  • The distance labeled "L1" (default 5) is the length from the center of the top hole to the center of the bottom hole.
  • The distance labeled "L2" (default 1) is the width of the part as a whole.
  • The distance labeled "L3" (default 1.5) is the length for the center of the top hole to the center of the middle hole.
  • The distance labeled "L4" (default 2) is the length from the bottom of the part to the lowest bend.
  • L5
  • The distance labeled "D1" (default .25) is the length of the diameter of either the top or bottom hole.
  • The distance labeled "D2" (default .5) is the length of the diameter of the middle hole.

Oval Mount

Msp temp29.png

Current Template Values:

  • The distance labeled "L1" (default ) is the length from the center of the top hole to the center of the middle hole.
  • The distance labeled "R1" (default ) is the length from the center of the top hole to the top arc, or from the center of the bottom hole to the bottom arc.
  • The distance labeled "R2" (default ) is the length from the center of the middle hole to the left and right arcs.
  • The distance labeled "D1" (default ) is the length of the diameter of the middle hole.
  • The distance labeled "D2" (default ) is the length of the diameter of either the top or bottom hole.