Difference between revisions of "Must have some Straight Lengths at Both Ends"
| Line 1: | Line 1: | ||
You must have some straight length at both ends of your part. At times a customer will not allow for enough material for the CLR. | You must have some straight length at both ends of your part. At times a customer will not allow for enough material for the CLR. | ||
| − | As an example; If a bend is 90 degrees you must have at least the CLR to define that leg. Notice how | + | As an example; If a bend is 90 degrees you must have at least the CLR to define that leg. Notice how the length boxes turn red when an error has occurred. To correct the error make sure your die is high enough to support the length you desire. |
[[File:Pic1.jpg]] | [[File:Pic1.jpg]] | ||
Revision as of 14:40, 26 June 2014
You must have some straight length at both ends of your part. At times a customer will not allow for enough material for the CLR.
As an example; If a bend is 90 degrees you must have at least the CLR to define that leg. Notice how the length boxes turn red when an error has occurred. To correct the error make sure your die is high enough to support the length you desire.
