Bend-Tech CAD Software

Bend-Tech CAD Software offers a variety of packages for tube and pipe CAD design solutions tailored to every level of fabrication. Whether creating quick 2D parts, designing full assemblies, or producing full-scale manufacturing projects, Bend-Tech provides the precision, efficiency, and flexibility needed to elevate workflows.

Entry-level 2D tube bending software for fast, accurate part creation. Ideal for single part projects or pre-built templates, EZ streamlines design, layout, and simplifies bend calculations.

$99

EZ Details

Bring designs into 3D. The tri-star interface of EZ3D visualizes bends and rotations while automatically calculating angles for precise, repeatable results.                             

$199

EZ3D Details

Full 3D assembly design made simple. PRO handles complex parts and complete assemblies with precise dimensioning, and automatic cut and bend instructions for complete control.

$399

PRO Details

Commercial-grade software for fabricators and manufacturers. With advanced manufacturing tools and complete design flexibility, SE ensures precision across every part.

$699

SE Details

Key Features

Click Below for More Information 

All Features in EZ are shown below:

Template Designer

Sketch 2D Designer

Custom Part

Material & Die Libraries

Basic Bend Calculation Output

Post-Bending Cutoff

Max Bends per Part: 6

All Features in EZ and:

Sketch 3D Designer

Custom Part 3D Designer

Harpoon Designer

Rotational Calculation

Bend Order Manipulation

Bending Simulation

Max Bends per Part: 6

All Features in EZ, EZ3D, and:

Assembly Designer

Part Dimensioning

Centerline Adjustment

Tube Notching Instructions

Springback Calculator

Max Bends per Part: 10

All Features in EZ, EZ3D, PRO, and:

STEP, IGES Import and Export

XYZ Designer

Reverse Engineering

Advanced Calculation Output

Unit Conversion

Manufacturability Checking

Multiple Dies for Single Part

Large Radius Bending (+Crowning)

Nesting

Pricing Utility

Max Bends per Part: 100

EZ Features

All Features in EZ are shown below:

Click the features below for more info

Template Designer

Sketch 2D Designer

Custom Part

Material & Die Libraries

Basic Calculation Output

Post Bending Cutoff

Max Bends per Part: 6

EZ3D Features

All Features in EZ and:

Sketch 3D Designer

Custom Part 3D Designer

Harpoon Designer

Rotational Calculation

Bend Order Manipulation

Bending Simulation

Max Bends per Part: 6

PRO Features

All Features in EZ, EZ3D and:

Assembly Designer

Part Dimensioning

Centerline Adjustment

Tube Notching Instructions

Springback Calculator

Max Bends per Part: 10

SE Features

All Features in EZ, EZ3D, PRO and:

STEP, IGES Import and Export

XYZ Designer

Reverse Engineering

Advanced Calculation Output

Unit Conversion

Manufacturability Checking

Multiple Dies for Single Part

Large Radius Bending (+Crowning)

Nesting

Pricing Utility

Max Bends per Part: 100

Available Add-On Modules

EZ Modules

N/A

EZ3D Modules

N/A

PRO Modules

SE Modules

Roll Cage Templates Module
Armor Pack Templates Module
Exhaust Designer Module
Motorsports Templates Module
Sheet Metal Templates Module
Handrail Designer Module

Available Add-On Modules

N/A

N/A

Roll Cage Templates Module

Roll Cage Templates

Armor Pack Templates Module

Armor Pack Templates

Exhaust Designer Module

Exhaust Designer

Motorsports Templates Module

Motorsport Templates

Sheet Metal Templates Module

Sheet Metal Designer

Large Radius Designer

Roll Cage Templates Module

Roll Cage Templates

Armor Pack Templates Module

Armor Pack Templates

Exhaust Designer Module

Exhaust Designer

Motorsports Templates Module

Motorsport Templates

Sheet Metal Templates Module

Sheet Metal Designer

Large Radius Designer

Handrail Designer Module

Handrail Designer

Benefits of Bend-Tech CAD Software

Built and Supported by    Bend-Tech

Built for the fabricator, Bend-Tech’s in-house CAD software makes tube and pipe design simple, fast, and accurate. 

Simplify Tube and Pipe Fabrication

 Create accurate parts in seconds, reduce errors, and eliminate guesswork to focus on getting more done. 

Bend with Confidence 

Precise calculations and ready-to-use templates remove the guesswork out of tube and pipe bending.

Frequently Asked Questions

Recommended Requirements:

  • Windows operating system (Windows 11) — Bend-Tech software does NOT run on MAC
  • 1Ghz Quad-core processor
  • 4GB Ram (Memory)
  • 1GB Hard drive space
  • 1920 x 1080 Screen resolution or greater
  • .NET Framework 3.5 SP1 installed
  • PDF reader or internet browser capable of reading PDFs
  • Full keyboard and mouse
  • High-speed internet

The Bend-Tech Software is backed by an extensive library of resources designed to make learning straightforward at every step. Countless tutorial videos and a full Wiki page packed with tutorials, tips, and tricks are available to guide users through every feature, from the basics to the more detailed capabilities.

With over 35,000 software customers, a strong base of users and shared knowledge already exists. Guided by ongoing customer feedback, Bend-Tech has focused development on the tube design aspect of CAD rather than adding features that complicate the design process. Bend-Tech support staff are also available to help with any questions during normal business hours.

Yes, all Bend-Tech products work with both millimeters and inches. SE and Dragon CAD are the only products in the line that allow for conversion between units of measurement.

Yes, Bend-Tech offers two different types of upgrades:

    1. Upgrade to a different product (i.e. PRO to SE): Upgrade cost will be the difference between the current and the desired software, plus a nominal shipping charge.
    2. Release update (i.e. PRO 5x to PRO 7x): Upgrade from an older version of Bend-Tech Software to the most recent (7x). Upgrade cost will be discounted from the list price.

No, Bend-Tech software does NOT run on Mac computers.

Yes, Bend-Tech PRO, SE, and IND can handle all materials including round, square, and rectangle. The calibration calculations and formulas will work for any shaped material including sheet and plate.

Bend-Tech offers a variety of software, upgrades, and additional options available for purchase on the Shop page of this website.

For a direct link to the shop, Click Here

For any questions, the dedicated Bend-Tech support staff is available during normal business hours of                                          Monday-Friday 8am-4pm (CT).

Phone: 651-257-8715

Email: support@bend-tech.com

Bend-Tech software supports several bender manufacturers out of the box, including Baileigh and Ercolina. If your bender isn’t on the supported list, you can still use it, manual calibration is available for other bender manufacturers. 

Yes, Bend-Tech offers a variety of additional module options available for purchase on the Shop page of this website.

Purchase modules here.

No, it cannot. However, the software is able to export DXF files for sheet metal, but no cutting information on tube materials.

Our Sales Team is Ready to Help

Learn More

Have questions? Our expert sales team is here to help. Contact us today to get started.

Contact Us

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Please fill out the form below to contact the Bend-Tech Sales team

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Template Designer

alt=Image of Template Designer Feature on Bend-Tech Tube and Pipe Software

Start Instantly – Choose from pre-built templates for common part shapes and save setup time.  

Customize Easily – Adjust dimensions or angles to fit users’ exact needs.  

Stay consistent – Ensure accuracy and repeatability across multiple parts.  

Available in: EZ EZ3D PRO SE

Sketch 2D Designer

alt=Image of Sketch 2D Feature on Bend-Tech Tube and Pipe Software

Click and Sketch - Draw parts directly on the screen.  

Adjustable Grid Snapping – Align and shape designs with accuracy.

Edit Anytime – Change dimensions or angles instantly without starting over.

Available in: EZ EZ3D PRO SE

Custom Part 2D Designer

alt=Image of Custom Part 2D Feature on Bend-Tech Tube and Pipe Software

Build Step by Step – Start at one end and enter distances and bend angles to shape each part.  

Input exact values – Use known dimensions to generate a perfect match to real-world designs.   

Apex or Tangent Lengths – Choose the input method that best fits each workflow and part setup. 

Available in: EZ EZ3D PRO SE

Material and Die Libraries

Material Library

alt=Image of Tube and Pipe Library Feature on Bend-Tech Tube and Pipe Software

Centralized Material Database- Store all tube and pipe specifications in one convenient place for faster setup. 

Customizable Settings- Specify outside diameter, wall thickness, weight, name and unit of measure for each material.  

Reliable Consistency – Ensure every part is based on accurate, standardized material information.  

Round: EZ EZ3D PRO SE
Square: EZ EZ3D PRO SE
Rectangle: EZ EZ3D PRO SE

Die Library

alt=Image of Die Library Feature of Bend-Tech Tube and Pipe Software

Centralized Die Management – Store and organize all dies for quick, easy access. 

Calibrate your Bender Dies – Calibrate dies or select from the extensive OEM list for the most accurate results.  

Available in:
EZ, EZ3D, PRO, SE

Basic Bend Calculation Output

alt=Image of Bend Calculation Output Feature of Bend-Tech Tube and Pipe Software

Eliminate Guesswork  – Accurate calculations simplify every bend and ensure accuracy.  

Save Setup Time – Reduce trial and error and speed up bending workflow.  

Production Ready Data – Automatically calculate cut lengths, bend locations, rotations (0.0 or 180.0 degrees) and angles. 

Available in: EZ EZ3D PRO SE

Post Bending Cutoff

Cutoff Calculation – Die limitations allow for the calculation of the bend cutoff.  

Adjust bend locations – Bend positions are updated to account for added cutoff length.  

Simplifies Production – Avoids issues with parts being too short to clamp in a die.  

Available in: EZ EZ3D PRO SE

Sketch 3D Designer

alt=Image of the Sketch 3D Designer Feature of the Bend-Tech Tube and Pipe Software

Sketch in 3D – Design parts efficiently with intuitive click and draw tools. 

Work Across All Planes – Switch between X, Y, and Z planes for full design control. 

Snap for Accuracy – Use grid snapping to align bends and dimensions precisely.   

Available in: EZ EZ3D PRO SE

Custom Part 3D Designer

alt=Image of the Custom Part 3D Feature of the Bend-Tech Tube and Pipe Software

Step by Step 3D Design – Enter values directly into the Tri-Star and instantly see parts update in real time. 

Visual Precision – Verify dimensions and directions while building for complete control.  

Automatic Bend Calculation – Angles and rotations are generated automatically for accurate, bend-ready results.  

Available in: EZ EZ3D PRO SE

Harpoon Designer

alt=Image of Harpoon 3D Feature of Bend-Tech Tube and Pipe Software

Fast, Flexible Creation – Ideal for quickly designing and testing new part ideas without complex setup.  

Interactive 3D Design – Click, drag, and shape parts directly in 3D.  

Drag then Type Precision – Rough in designs visually, then enter exact dimensions for accurate final parts.  

Available in: EZ EZ3D PRO SE

Bend Order Manipulation

alt=Image of Bend Order Manipulation Feature of Bend-Tech Tube and Pipe Software

Full Bend Control – Choose the order of bends to match machine setup and workflow.  

Flexible Sequencing – Bend from either end, flip between bends or create a fully custom sequence.  

Reduce Errors – Plan bends ahead of time to prevent rework and wasted material. 

Available in: EZ EZ3D PRO SE

Bending Simulation

alt=Image of the Bending Simulation Feature of Bend-Tech Tube and Pipe Software

Visualize Every Bend – See the bending process step by step before running parts.  

Confirm Manufacturability – Verify that part and bend order are production-ready.  

Streamline Production – Identify and correct issues digitally before reaching the shop floor.  

Available in: EZ EZ3D PRO SE

Assembly Designer

alt=Image of the Assembly Feature of the Bend-Tech Tube and Pipe Software

Multi Part Design – Combine various straight and bent parts into a single assembly.  

Accurate Fit up – Control how each tube meets and aligns with the next.  

Reduce Trial and Error – Identify misalignments or fitment issues early, minimizing wasted material and time.  

Available in: EZ EZ3D PRO SE

Parts Dimensioning

alt=Image of Part Dimensioning Feature of Bend-Tech Tube and Pipe Software

Full View Dimensioning: Generate top, side and front dimensions for any part or full assembly.  

Clear Guidance: Provide detailed, accurate, and easy-to-follow measurements for reliable build instructions.  

Consistent Results: Ensure every part matches the intended specifications and dimensions.  

Available in: EZ EZ3D PRO SE

Centerline Adjustment

alt=Image of Centerline Adjustment Feature of Bend-Tech Tube and Pipe Software

One-Click Switch: Toggle between inside, outside and centerline views instantly. 

Easy Fine Tuning: Adjust tubing paths without redrawing or rebuilding parts. 

Precision Control: Refine path positions to ensure parts meet design requirements.  

Available in: EZ EZ3D PRO SE

Tube Notching Instruction

alt=Image of the Cutting Wrappers Feature of the Bend-Tech Tube and Pipe Software

Faster Manual Notching: Quickly layout hole-saw and grinder cuts, eliminating guesswork and speeding up workflow.  

Accurate Cut Profiles: Printable cutting wrappers show the exact notch or cut shape, allowing for accurate layout and repeatable results.  

Integrated Alignment: Rotation and location lines ensure all wrappers are positioned correctly for accurate fabrication.  

Available in: EZ EZ3D PRO SE

Springback Calculator

alt=Image of Springback Calculator Feature of Bend-Tech Tube and Pipe Software

Smart Bend Adjustment – Input bend data and let the software auto compensate for material springback.  

Reduce Waste – Prevent incorrect bends and lower material and production costs.  

Fewer Delays – Predictable, precise bending results ensure uninterrupted operations.  

Available in: EZ EZ3D PRO SE

STEP, IGES, DXF Import and Export

STEP, IGES Import and Export

STEP File Support: Import round tube designs directly from STEP (.step, .stp) files for seamless workflow integration. 

IGES and DXF Compatibility: Additional support for IGES (.iges, .igs) and DXF (.dxf) files ensures continued CAD integration.  

Designer-Ready: Send imported designs straight into Assembly or XYZ designers for further customization.   

Available in: EZ EZ3D PRO SE

XYZ Designer

alt=Image of ZYZ Part Feature of Bend-Tech Tube and Pipe Software

Precise Input – Define geometry with XYZ coordinates for endpoints, bends and centerline radii.  

Automatic Calculation – Generate LRA, cut length and spring-back data. 

Optimized Output – Ensure every bend and cut meets specification with pinpoint precision.  

Available in: EZ EZ3D PRO SE

Reverse Engineering

alt=Image of Reverse Design Feature of Bend-Tech Tube and Pipe Software

Recreate Existing Parts – Input bend data or instruction to generate accurate LRA or XYZ models.  

Correct Design Errors – Adjust or fix parts created with incorrect radii without starting over.  

Design Recovery – Digitize and refine existing bending instructions for reuse or optimization.  

Available in: EZ EZ3D PRO SE

Advance Calculation Output

alt=Image of Advanced Calculation Output Feature of Bend-Tech Tube and Pipe Software

Customizable Data Output – Adjust length, rotation and angle formats to match workflow.  

Flexible Layout – Tailor bending data layouts for different projects and parts.  

Visual Clarity – Generate detailed, dimensioned flat layouts for easy reference.  

Available in: EZ EZ3D PRO SE

Unit Conversion

alt=Image of Unit Conversion Feature of Bend-Tech Tube and Pipe Software

Quick Conversion – Switch between inches and millimeters for any design.  

Adaptable Design – Accommodate different standards and specifications 

Accurate Measurements – Ensure parts maintain precision, regardless of unit system.  

Available in: EZ EZ3D PRO SE

Manufacturability Checking

Custom Tooling Restrictions: Set precise bend and material limits based on bender and dies. 

Clear Visual Alerts: Automatically flag bends, rotations or end lengths that fall outside defined limits.  

Smart Auto Adjustments: Apply recommended fixes, such as adding end material to keep designs production-ready without the guesswork.  

Available in: EZ EZ3D PRO SE

Multiple Dies for Single Part

alt=Image of the Multiple Dies Feature on the Bend-Tech Tube and Pipe Software

Individual Bend Control – Assign specific die sizes to different bends on one part.  

Custom Flexibility – Manage multiple dies without redesigning or splitting parts.  

Reduce Rework – Achieve accurate multi-die bends on the first try and reduce wasted material.  

Available in: EZ EZ3D PRO SE

Large Radius Bending

alt=Image of the Large Radius Bending Feature of Bend-Tech Tube and Pipe Software

Design Beyond Tight Bends – Create and visualize large radius bends for complex projects.  

Industry Versatility – Adaptable across multiple industries, delivering consistent repeatable bends.  

Creative Freedom – Create complex bends without the limits of traditional bend tools.  

Available in: EZ EZ3D PRO SE

Nesting

alt=Image of the Nesting Feature in the Bend-Tech Tube and Pipe Software

Optimized Material Use – Maximize yield from stock lengths for every job.  

Cost Savings – Reduce waste and lower material expenses by efficiently nesting parts.  

Faster Planning – Calculate required lengths of any quantity, streamlining production. 

Available in: EZ EZ3D PRO SE

Pricing Utility

alt=Image of Pricing Setting Feature of Bend-Tech Tube and Pipe Software

Accurate Estimates – Combine material, labor and setup into one clear total.  

Optimized Quoting – Adjust pricing based on part quantity. 

Informed Decisions – Know margins before a job begins.  

Available in: EZ EZ3D PRO SE

Rotational Calculations

Rotational Calculations

Bend-Tech will automatically generate accurate rotational values for your designed tubes & pipes. With PRO, SE, or IND, you will have options to set your rotations as absolute or incremental.

Available in: EZ EZ3D PRO SE

System Requirements

Minimum Supported Requirements:

  • Windows 10 or Higher Operating System. (Bend-Tech software does NOT run on MAC.)
  • 1 GHz Processor
  • 4 GB RAM (Memory)
  • 1 GB Hard Drive Space
  • OpenGL 1.3 Compatible Graphics Card
  • Active Internet Connection (Internet connection is needed during first activation and then every 6 months, software can run offline after activation)

Recommended Requirements:

  • Windows 11 Operating System. Bend-Tech software does NOT run on MAC.
  • Intel Core 10th Generation I5 or better
  • 8GB Ram (Memory)
  • 1 GB Hard Drive Space (SSD Recommended)
  • 1920 x 1080 Screen Resolution or greater
  • OpenGL 1.3 Compatible Graphics Card
  • PDF Reader Installed (for Help Guides)
  • Full Keyboard and Mouse
  • High-Speed Internet

Material Support Lift (B-Axies)

Bend-Tech A400 Material support
  • The material support lift automatically moves up and down and moves out of the way from the track when not needed. The complete automation prevents the center support from colliding with the track and chuck trolley.
  • The fully automatic material support lift prevents bowing in long pieces (as shown in red above) for accurate cutting, marking, and engraving.
  • As shown above, the material support lift goes up and down to maintain constant centered leveling support as a square or rectangle tube rotates.

Dragon A400 - Frequently Asked Questions

What are the material capabilities?

  • Tube Profile: 1” – 6” round,” to “Tube Profile: 0.75” – 6” round
  • Tube Material Type: steel, aluminum, stainless steel, DOM, HREW, black pipe, galvanized steel, and any type of electrically conductive material.
  • Tube Length: full stick length capable up to 24 feet.

What is included in the purchase of a Dragon A400?

The Dragon A400 machine, center support lifter, marker, engraver, laser pointer, technology package, and Bend-Tech Dragon Software. Requirements: An active internet connection, a plasma torch with a mechanized head, 220-240V outlets, two 110-120V outlets, misc. outlets, and an air compressor. Available add-ons: plasma system, material coolant system, angle/channel motorized gate, and additional software license.

What size of plasma cutter does the machine use?

Contact our sales personnel so they can assist in selecting the correct plasma system.

What is the warranty

Your Dragon A400 has a 12 month electronics and hardware limited warranty.

What service is available for the machine?

Customer support always answers the phone during our business hours and we strive to work with you to resolve the problem. If necessary, Bend-Tech can send a Dragon Technician to location.

How does the initial setup process work?

Your Dragon A400 is shipped partially assembled. All Dragon A400 machines are fully assembled, calibrated, and tested at headquarters. Then, the machines are partially disassembled for shipping. Your Dragon A400 comes with a comprehensive assembly manual.

Are replacement parts available?

Yes, we keep a full stock of inventory of parts.

Where is the Dragon A400 made?

Your Dragon A400 is proudly assembled here in the USA. All of our departments are located in our 36,000 square foot facility in Osceola, Wisconsin. Almost all of the parts are from the Minneapolis & St. Paul area here in the Midwest.

Does the software have import, export, CAD/CAM, and designer abilities?

Yes. The Dragon CAD/CAM software can import/export to and from many of the commonly used CAD programs (such as Solidworks, Inventor, AutoCAD, PRO Engineer, Tekla, SDS2, etc.) and can be used as a design program.

What software maintenance, charges, and updates occur with the Dragon?

A 2 Year Maintenance Package is included in the purchase of a Bend-Tech Dragon A400. After the 2 Year Maintenance Package has expired, there is a year long maintenance package that is repurchased on a yearly basis to continue to receive support and software updates.

What is your current lead time?

Typically, our lead time is 2 – 4 weeks. Bend-Tech always has inventory of the A400 by constantly manufacturing machines. For the current lead time, contact our sales personnel.

Is the Dragon A400 a production machine?

Yes

How many Dragon machines are out in the field?

Over 600

How does the Dragon A400 load?

From the front, back, top, or either side; it depends on how your shop is set up and what you are cutting. There are multiple ways to easily load material. The tube can be placed in the front gate, then tightened into the self-centering four jaw chuck, and then the front gate can be closed to the correct amount of tightness on the material. Usually, loading takes one person.

What is the cut speed?

The cut speed varies based on a variety of factors; including material size, cut design, material type, tolerance requirements, material thickness, the use of a coolant system, and others. Depending on the variables, the torch can run up to 120 inches per minute while cutting. Between cutting, the rapid travel can run up to 1100 inches per minute (X-axis) and 30 RPM (Y-axis).

What is the cut quality/dross level?

The dross level varies based on a variety of factors; including amperage used, cut speed, material size, cut design, material type, tolerance requirements, and material thickness. Optional coolant circulation system can greatly improve the cut quality and dross level. You can request a benchmark/sample package to see the Dragon cut parts in person.

What is the tolerance on the cuts?

+/- 0.010” (0.254mm)

How easy is the software to use?

Like many software programs, it does take some time to get comfortable knowing the ins and outs of the Bend-Tech Software. Most people become comfortable using the Bend-Tech Software after a couple days of practice and from there they become increasingly aware of the more detailed features. In case there is confusion with certain aspects of the software, we have Wiki pages and videos to help teach and train people on the software (see more). Also, the Bend-Tech support staff is always around to help during the normal weekly business hours. There is an On-site Training option available for purchase (see more). The On-site Training includes Bend-Tech sending a Dragon Technician on-site to train your Dragon Operator(s) on how to use the machine and the software. Customers are also allowed to come visit Bend-Tech headquarters to receive their training.

How long has Bend-Tech been in the tube and pipe business?

Since 2001

Do you have more questions for us? We have a full staff of dedicated sales personnel to help answer any of your questions:

  • Phone: 651-257-8715
  • sales@bend-tech.com

Dragon A400 - Post Purchase Items

Delivery

  • The lead time for the Dragon A400 is typically zero to four weeks. Shipping usually takes about a week, but varies on location. Once your Dragon has started shipping, you will receive a tracking number. Contact Bend-Tech sales personnel for a current lead time.
  • Bend-Tech is responsible for the package through the delivery process. Bend-Tech coordinates with the shipping company and if there are any problems, Bend-Tech resolves the error with the shipping company. If there is an error or damage in the shipping, please contact the Bend-Tech sales personnel right away. The Bend-Tech sales personnel focus on making sure the necessary steps are taken to get the machine up and running as soon as possible.
  • The Bend-Tech Dragon A400 is shipped in a fully enclosed wood crate. The crate is 10’ (3.05m) length by 5.5’ (1.68m) width by 7’ (2.13m) height.

Installation

The Dragon A400 ships partially assembled. All Dragon A400 machines are fully assembled and calibrated at headquarters. Then, the machines are partially disassembled for shipping. Your Dragon A400 comes with a comprehensive assembly guide to instruct on how to properly reassemble the machine.

Technical Documents

  • The technical documents are a detailed description on all of the different aspects of the machine so that an operator can be self-sufficient in all things with your Dragon A400 machine.
  • Included in the technical documentation is: Customer Order, Crate Packing Checklist, Assembly Manual, Start-Up and Training Manual.

Warranty

  • Your Dragon A400 has a 12 month limited warranty. Defective or faulty parts identified on the machine within this time period after delivery will be replaced at no charge and shipped to the location. After the 12 month warranty period, replacement parts can be purchased through Bend-Tech, LLC. and shipped to the location at the customer’s discretion.
  • THE WARRANTY MAY BECOME VOID OR LIMITED IN THE EVENT THAT YOU MAKE HARDWARE CHANGES OR ADAPTATIONS TO THE MACHINE.

Dragon A400 Software Maintenance Plan

A 2 year Software Maintenance Package is included in the purchase of a Bend-Tech Dragon A400. After the 2 Year Software Maintenance Package has expired, there is a year long maintenance package that is repurchased on a yearly basis to continue to receive support and software updates. The Dragon Software is always improving to ensure the best capabilities for your company and others. The Software Maintenance Package provides consistent updates to your software and keeps you running with the newest capabilities. Your Bend-Tech, LLC. sales person will contact you one month to two weeks before your maintenance plan expires to ask if you would like to re-apply for an annual subscription.

Dragon A400 - Shop Requirements

Machine Footprint

a400 footprints
  1. The 12’ length machine has a footprint of 19.1’ (5.82m) length by 2.5’ (0.76m) width by 6.1’ (1.86m) height.
  2. The 24’ length machine has a footprint of 32’ (9.75m) length by 2.5’ (0.76m) width by 6.1’ (1.86m) height.
  3. The enclosed workstation cabinet is the Technology Package is 2’ (0.61m) length by 2.1’ (0.64m) width by 5.3’ (1.62m) height and a power cord lead of 12’ (3.66m). (This is an add-on feature that does not come standard with the machine.)

Setup Requirements

a400 machine setup
  • Dedicated Windows desktop or laptop with an ethernet port (The computer running your Dragon machine cannot be running other machines. Technology Package comes standard with the machine.)
  • Active internet connection (for the activation of your Dragon Software and to receive important updates.)
  • >Plasma system with mechanized head.
  • 220-600V outlet (for plasma system)
  • Two to four 110-120V outlets (one for the machine, one for the laptop or computer, one if a computer monitor is being used, and one if the optional coolant system is purchased).
  • An air compressor or inert gas with two lines (one line for the control box and one line for the plasma system).

A250 Post Purchase Items

Delivery

  • The production lead time for the Dragon A250 is typically 0 to 4 weeks. Shipping usually takes about a week but varies on location. Once your Dragon has started shipping, you will receive a tracking number. Contact a Bend-Tech salesperson for a current lead time.
  • If needed, the Dragon A250 can be liftgate delivered and moved with a pallet jack.
  • Bend-Tech is responsible for the package through the delivery process. Bend-Tech coordinates with the shipping company. If there is an error or damage in the shipping, please contact the Bend-Tech service team right away. The Bend-Tech service team focuses on making sure the necessary steps are taken to get the machine up and running as soon as possible.

Installation

The Dragon A250 is shipped partially assembled in one crate. The Dragon A250 comes with instructions on the proper set up and install process.

Warranty

  • Your Dragon A250 has a 12-month limited warranty. Defective or faulty parts identified on the machine within this time period after delivery will be replaced at no charge and shipped to the location. After the 12-month warranty period, replacement parts can be purchased through Bend-Tech, LLC. and shipped to the location at the customer’s discretion.
  • THE WARRANTY MAY BECOME VOID OR LIMITED IN THE EVENT THAT YOU MAKE HARDWARE CHANGES OR ADAPTATIONS TO THE MACHINE.

Dragon A250 Software Maintenance Plan:

Included with the purchase of your Dragon, the 2-Year Maintenance Package has the latest updates and enhancements in the software and direct customer support over the phone, email, or computer.

The Next Step Towards Owning a Dragon

In Person

Bend-Tech Cutting

Call or email Bend-Tech to set up a time to come visit us to see the Dragon and Bend-Tech Software in person. We always welcome people to tour our facilities and receive detailed information from our Dragon Technicians through live demonstrations. If you cannot visit us in person, we can give a virtual tour of our facilities with an online video chat.

Benchmark

Bend-Tech Benchmark

Contact us and we will make a benchmark of your parts. Send us the material and the design file, and we will cut out the parts and ship them to you with a video link of your parts being cut via email. The benchmark provides an opportunity to see the cut speed, cut quality, and clean up amount for your parts.

Virtual Cutting Demonstration

Zoom Demo

Call or email Bend-Tech to set up a time to connect with us online via live video. Our sales staff and Dragon Technicians will demonstrate the Dragon’s operation live and answer any of your questions.

Sample Package

Bend-Tech Dragon Samples

Bend-Tech can send you a sample package containing a variety of sample parts cut on the Dragon. Round, square, steel, and aluminum tubes have various cuts that show the Dragon’s cut quality (the sample pack is free including shipping).

Comprehensive Pricing Guide

Bend-Tech Dragon

Contact Bend-Tech for a comprehensive pricing sheet. The pricing sheet breaks down the price on each available item. This allows you to select the best options that fits your shop’s needs.

Schedule a demo or request a sample

Shop Requirements

Setup Requirements

  • Active internet connection, for the activation of your Dragon Software and to receive important updates.
  • Plasma system with mechanized head. 220-600V outlet (for plasma system).
  • Plasma system with mechanized head.
  • 220-600V outlet for plasma system
  • Two to four 110-120V outlets. One for the machine, one for the laptop or computer, one if a computer monitor is being used, and one if the optional coolant system is purchased.
  • An air compressor or inert gas with one line, for the plasma system.

Dragon A250 - Frequently Asked Questions

What is included in the purchase of a Dragon A250?

The Dragon A250 machine, marker, laser light, and the Bend-Tech Dragon Software Suite.

How does the initial setup process work?

Your Dragon A250 is shipped partially assembled and comes with a comprehensive assembly manual to instruct on how to properly reassemble the machine.

Are replacement parts available?

Yes, we keep a full stock inventory of parts.

Where is the Dragon A250 made?

The Dragon A250 is proudly designed, manufactured, and assembled in Osceola, WI, USA.

Is the CAD/CAM software included?

Yes, the Bend-Tech Dragon Software Suite is included with your Dragon A250.

How many Dragon machines are out in the field?

Over 600 and counting.

How does the Dragon A250 load?

From the front, back, top, or either side; it depends on how your shop is set up and what you are cutting there are multiple ways to easily load material. The tube can be placed in the front gate, then tightened into the self-centering three jaw chuck, and then the front gate can be closed to the correct amount of tightness on the material. Usually, loading is done by one person.

What is the cut tolerance on the Dragon A250?

+/- 0.010 inch

What is the cut quality/dross level?

The dross level varies based on a variety of factors; including amperage used, cut speed, material size, cut design, material type, tolerance requirements, and material thickness. The optional Material Coolant System add-on can greatly improve the cut quality and dross level. You can request a benchmark/sample package to see Dragon cut parts in person.

Do you have more questions for us? We have a full staff of dedicated sales personnel to help answer any of your questions:

  • Phone: 651-257-8715
  • sales@bend-tech.com

Security Dongle

If a valid internet connection is not available on your computer, you may choose to purchase a security dongle to use the software offline. This will allow your computer to run Bend-Tech software as long as the security dongle is plugged into an available USB port on the computer. This USB security dongle becomes the license for your software.

Important

While the security dongle will allow your computer to run Bend-Tech software without an internet connection, there are a few drawbacks to using the offline method. Bend-Tech software will not be able to automatically download any new updates and the direct Help Session will not be available. Also, any maintenance of a security dongle requires shipment back to our facility and back to you at additional cost. If you are unable to provide shipment of your security dongle (such as loss or theft), you will be required to purchase the dongle along with the full price of your software.

Purchase Dongle